How to Fit Your KabinKurtain Cab Divider Curtain

Fitting in under a minute

Every KabinKurtain fits the same way although fitting points vary depending on vehicle type. There are no tools required and no rails, screws or glue. Tabs on the curtain push into your van’s headliner and between the B-pillar trim and vehicle main frame. It takes less than a minute to put up and you can take it down in seconds. The fit is 100% blackout, which makes it ideal for stealth camps and early nights.

What you need

• Your KabinKurtain
• Support pole (Pop-Top editions only) – supplied separately

Before you start

• For VW T5-T6-T6.1 KLASSIC edition the captain’s seat backs need to be upright and forward of the seat belt trim

Step-by-step fitting (the vehicle used in this guide is VW T6.1 fitted with a KLASSIC edition)

1. Unpack and unfold. Take the curtain out of its bag and find the top edge with the tabs. The “shiny” side faces towards the cockpit and windscreen.
2. Start at one side. Push the first tab into the point between the roof and B-Pillar. You can start on either the driver’s or passenger side, whichever is easiest. Repeat on the opposite side and then insert the remaining tabs down each side.

1. Work across the cab. Push each tab into the headliner in turn, so the top edge sits flush with the headliner.

1. Fold up bottom. If you have a night heater fitted under the seat, fold up the bottom section and hold it in place using the additional tabs

That’s it: fitted in under a minute, with no tools required.

Removing and storing

• Pull the tabs gently out one at a time.
• Fold or roll the curtain and pack it into its compact bag.
• You can leave it in place while driving, as long as the cab windows are closed. Note this will restrict your rear view.

Model notes

• Captain seats (Klassic): These are made for a driver’s seat and a passenger captain chair, and they work with swivel seats.

• Double passenger seat (Kontour): The shape follows the fixed recline and contour of the double passenger seat. The Kontour also fits vans with captain chairs.

• Pop-Top roof (Pop-Top Klassic and PopTop Kontour): These come with a support pole (supplied separately) and work with the roof up or down.

• Kombi: Fits at the midpoint of the van, as a temporary partition between the rear and passenger areas. Its tabs go into both the headliner retaining band and the lower panels. It suits standard LWB and SWB T5 to T6.1 vans, and it cuts down on heating dead space.

• Ford Transit Custom: Fits the Ford Transit Custom up to 2023, without a pop-top roof. The fitting is the same no-tools, no-rails method.

Care

• Wipe clean with a damp cloth. The material is durable and wipe-clean.

Find your KabinKurtain

Fit it once and you’ll never go back to rails or stick-on screens. Find the right one for your van:

• VW T5, T6 & T6.1 Cab Divider Curtains
• VW Pop-Top Cab Divider Curtains
• Ford Transit Custom Cab Curtain
• The full KabinKurtain range